UV DTF ✨Sticker✨ SAMPLE PACK

These will contain a mystery pack of four 3 inch stickers so you can try these out and make sure you get you know how to apply.

🌟 How to Apply UV DTF Stickers & Cup Wraps 🌟

These steps work for both flat surface stickers and curved cup wraps!

✨ What You’ll Need:

• Your UV DTF sticker or wrap

• A clean, smooth surface (cups, tumblers, glass, plastic, etc.)

• A squeegee or credit card

• Rubbing alcohol & paper towel (for cleaning)

🧼 Step 1: Clean the Surface

Wipe your item down with rubbing alcohol to remove any dust, oils, or residue. Make sure it's completely dry before applying the sticker.

✂️ Step 2: Prep Your Sticker

• Carefully cut out the sticker or wrap if it’s part of a sheet.

• DO NOT peel off the top clear film yet.

💳 Step 3: Rub It In

Use a squeegee or the edge of a credit card to firmly rub over the entire surface of the sticker. This helps the design stick to the clear transfer film.

🫳 Step 4: Peel the Backing

Flip it over and slowly peel off the bottom clear film, making sure the design sticks to the clear film. If any part is lifting, press it back down and rub again.

🥤 Step 5: Place Your Design

• Line it up carefully on your cup or surface (you only get one shot—UV DTF is permanent once applied).

• Press it down starting from the center, working outward to avoid air bubbles.

🔥 Step 6: Rub Again

Firmly press and rub the entire sticker with your squeegee or card to ensure it’s fully adhered—especially the edges and fine details.

🚨 Step 7: Peel the Clear Film

Slowly peel away the clear top film at an angle. Take your time!

• If any part of the design lifts, press the film back down and rub again.

✅ Done!

You now have a beautiful, permanent UV DTF design! These decals are waterproof, scratch-resistant, and super vibrant—no sealing needed.

ALL SALES ARE FINAL DUE TO THE NATURE OF THE PRODUCT.